[JFWRus] Ключи установки JAWS

Уважаемые участники рассылки!
Фирма "Фридом саентифик" выпустила документ, содержащий описание ключей для
инсталлятора JAWS 7.10 и выше. Эта информация может очень пригодиться
системным администраторам, а также продвинутым пользователям JAWS.
Этот документ можно найти по ссылке:
http://www.freedomscientific.com/fs_support/BulletinView.cfm?QC=1118
Ниже привожу его целиком, на английском языке. К сожалению, сейчас
просто нет времени переводить.
Олег
Bulletin Type: FAQ
Date Posted: 08/07/2006
Product Name: JAWS
Version: 7.10 plus
Category: Installation
Question:
What are the various command line switches I can use when installing
JAWS?
Answer:
There are a number of special installation commands that may be
helpful to network administrators. To install JAWS using these options, do
the following:
1. Press WINDOWS Key+R.
2. Choose the Browse button.
3. Navigate to the folder where the JAWS setup package is located.
4. Select the setup package file and press ENTER.
5. Press END and then press the SPACEBAR.
6. Type one of the following:
a.. /ExtractSettings <Path-to-file> - Outputs the contents of
Settings.ini to the output file specified. The installation process is not
performed. If the output file already exists, it is overwritten. If there
are spaces in the path to the file, the path must be enclosed in quotes (for
example: C:\Package.exe /ExtractSettings "C:\FS setup\OldSettings.ini" ).
b.. /ReplaceSettings <Path-to-file> - Specifies an initialization
file for the setup package engine to use instead of the Settings.ini file
stored in the resources. This flag can be used if any of the contents in
Settings.ini must be overridden. If there are spaces in the path to the
file, the path must be enclosed in quotes (for example: C:\Package.exe
/ReplaceSettings "C:\FS setup\NewSettings.ini" ).
c.. /Log - Outputs the setup package process to the log file
FS_Setup_Package.txt. The log file is created in the same folder as the
setup executable file.
d.. /Type Silent - Silently installs a typical installation of JAWS
without displaying any installation dialog boxes or prompts.
e.. /Type Repair - Repairs a typical installation of JAWS. Once the
repair begins, you will not be able to cancel the operation. During the
repair, progress dialogs are displayed and a clicking tone is played. At the
end, you will be prompted to restart your computer
f.. /Type Safe - JAWS is installed without making system changes.
System changes include installing video hooks in Windows NT, 2000, and XP,
and installing Microsoft Active Accessibility (MSAA).
g.. /Type SilentSafe - JAWS is installed silently and without making
system changes.
h.. /Type Client - Installs only those components necessary to run
JAWS from a local area network server. This setup type will not create a
JAWS folder, but will install video hooks and MSAA as needed.
i.. /Type SilentClient - JAWS is silently installed as a Client
setup.
j.. /Type Server - Server setup includes the same restrictions as
Safe setup. In addition, it creates only selected icons in the Start menu
and makes limited changes to the registry. Its intended use is for those who
want to install JAWS on a server, but do not intend to actually run JAWS on
the server.
k.. /Type SilentServer - Performs a silent Server installation.
l.. /Type ServerWithSpeech - ServerWithSpeech setup installs JAWS on
a server. Speech and braille access is provided for local users on the
server.
m.. /Type SilentServerWithSpeech - Performs a silent
ServerWithSpeech installation.
n.. /Type Remote - Use this setup type when installing JAWS on a
computer that will be accessed through a terminal session by JAWS users.
Special video hooks for terminal services are installed and the virtual
speech and braille drivers are set up. If you are running the installation
from a remote location during a terminal session, this setup type is
automatically detected.
o.. /Type SilentRemote - JAWS is silently installed as a Remote
setup.
p.. /Type Roam - Allows you to use JAWS on a network with roaming
profiles. No separate folders are created for user and shared settings. All
settings are stored in the folder where you installed JAWS.
q.. /Type SilentRoam - Performs a silent Roam installation.
7. Press ENTER.
Try the following article for information on JAWS startup command line
parameters: What are the JAWS startup command line parameters?
***
Это сообщение No4322
было разослано для 316 участников дискуссионного листа
[JFWRus] Ключи установки JAWS