[JFWRus] Jaws на Server 2003

Всем привет.
Плиз, срочно напишите или дайте почитать (потерял линк), какие подводные
камни могут встретиться при установке Jaws 7.0 или 5.1 на сабдж? Я 3 раза
ставил эту ось - Джоз на ней у меня ни разу не заговорил.
XXX___-?O
Ill fares the land
To hastening ills a prey
Where wealth accumulates
And men decay.
Всяких приятностей! cuthbert собака mlbox.ru
***
Это сообщение No2759
было разослано для 286 участников дискуссионного листа
[JFWRus] Jaws на Server 2003
Date Posted: 04/29/2003
Product Name: JAWS for Windows
Version: 5.10 plus
Category: Windows 2003 Server
Short Description:
Installing JAWS in Windows 2003 Server, Video Intercept Error
Problem:
Attempting to install JAWS on Windows 2003 server may result in a dialog stating
that the Video Intercept is not being installed
correctly. After choosing
the Install Video Intercept option, when you attempt to re-launch JAWS, you continue
to receive the Video Intercept error.
Note that JAWS 5.1 through 6.0 have been installed successfully and are known
to run on Windows server 2003.
Solution:
Before you install JAWS, you should ensure that the correct driver for the video
card is installed. By default, some drivers that
were present in Windows
XP were removed from the server release. As a result, your system will be automatically
reset to use the standard VGA driver. JAWS
cannot function in this
environment, but updating the video driver and reinstalling JAWS will correct
the issue.
Also, if you continue to experience problems, ensure that hardware acceleration
is set to 100%. In many cases, this is not set to
100% by default. You can
modify this setting by following these steps:
1. Open Start Menu, Settings, Control Panel and choose Display. This will open
the multi-page Display Settings dialog.
2. Press CTRL+PAGE UP to move to the Settings page.
3. Press TAB to move to the Advanced button and press ENTER. This opens another
multi-page dialog.
4. Press CTRL+TAB repeatedly to move to the Troubleshoot page.
Note that the exact layout of the Troubleshoot page could vary depending on the
installed video driver.
5. Press Tab to move to the Hardware Acceleration control. This is a slider,
so press the END key to force it to the uppermost
position. This will be 100%.
6. Press TAB to move to the OK button and press ENTER. The previous Settings
dialog is again displayed.
7. Press TAB to move to the OK button in this dialog and press ENTER.
8. Reboot your computer so that the changes will take effect.
***
Это сообщение No2770
было разослано для 286 участников дискуссионного листа
[JFWRus] Re: Jaws на Server 2003